[ Post a Response | Close Window | Print ]

Mower set-up for 3
Posted by Billy Foster at 2015-07-14 05:43:27
I finally got around to setting my mower to hook 3. I gave it a try last night and it seems to work wonderfully. There is still some tinkering to do and I have not gotten it into heavy grass yet but I think it was a success. Here is a link to a bunch of pictures I took while I was making the hitch.

http://s1266.photobucket.com/user/wayworn3/library/Mower%20set%20up%20for%203

Billy
Response by Jim at 2015-07-14 10:41:14
Nice job. Does the tongue tend to pull towards the right on a load due to the eveners pulling from off center on the left side of the tongue ?
Response by Billy Foster at 2015-07-15 05:24:27
Jim It runs pretty strait when clipping pasture but I suspect it will have some side draft when in heavy hay crop. I have a couple thoughts about helping with side draft if it becomes a problem but so far so good.
Response by Dale wagner at 2015-07-15 07:07:00
Why do you need three? are you working Shetlands? Properly setup mowers pull easy if sharp.
Response by Billy Foster at 2015-07-15 09:23:07
Dale I use Haflingers and we get pretty heavy hay crop up here. I have been using 2 and resting a bunch but thought I could use 3 and keep going. I like to ted right after cutting so my hope is this will keep them fresher and make that job easier as well.

Post a Response:
1) Enter your name and response.
2) Click "Send" to post your response on the Front Porch bulletin board.
3) Your response will be reviewed for appropriateness before being posted for public view.

Name:
Response:
     
[ Close Window | Print ]

Subscribe Homepage Contact Us
rural heritage logo    PO Box 2067, Cedar Rapids IA 52406-2067
E-Mail: